Basic Info.
Timing Function
With Timing Function
Ultrasonic Frequency
1.7MHz
Specification
9.5cm*16.5cm
Product Description
Product Description
Instructions
1. Please position the product and take out the cover vertically. Figure 1
2. Please open the water tank cover vertically upwards. Figure 2
3. Use the measuring cup to add water to the water tank, do not exceed the maximum water level of 100ml, and do not add water during the use of the product. (Do not use water with too high temperature)
4. After the water tank is filled with water, add essential oils appropriately. (It is recommended that 100ml drops of 0.1ml-0.15ml essential oil, about 2-3 drops) as shown in Figure 3.
5. Put the upper cover back vertically, and gently press the upper cover by hand to make the upper cover tight with the main body cover, and rotate the upper cover to adjust the spray port to the desired position. Figure 4
6. Please close the cover. Figure 5
7. Please insert the plug of the transformer into the socket at the bottom of the main unit, press the light button on the left, the first click is a colorful cycle light, and the second one starts to choose the light color, from low light effect to strong light effect, 7 colors 14 Kind of effect until closed. (Note: using the light function alone will not produce fog) Figure 6
8. Press the spray button on the right, press the first spray light to turn green for continuous spraying function, press the second spray light to turn red for intermittent spray mode, spray for 30 seconds, rest for 30 seconds, spray for 30 seconds and rest for 30 seconds in sequence, The spray mode and light mode will turn off at the same time when you press the third time.
9. If it is not used for a long time, pour out all the water in the water tank and store it in a dry place.
10. This product is set to prevent dry heating. If the water tank is short of water, it will automatically power off and shut down.Product operation instructions
1 Note that a slight difference in the spray concentration is normal.
2 Different types of water temperature, air temperature and wind will affect the fog effect.
3 If there is no water in the water tank, press the "Spray" button and the aroma diffuser will emit two "di" sounds and turn it off. The aroma diffuser cannot use the spray function alone without water.
4. Only suitable for 100% pure natural essential oils. If it contains chemical ingredients, fragrances or impurities, it may damage the product. Before changing to another essential oil, please clean the product according to the maintenance section.
5. It is forbidden to use adapters not provided by this product to avoid danger.
Emergency treatment method
If accidentally knocked over during use, please deal with the following methods:
1 Turn off the power, unplug the power cord and open the top cover.
2 Pour all the remaining water in the water tank from the side opposite to the air outlet.
3 Shake the fuselage gently to allow the accumulated water in the fuselage to drain from the drain, and place it in a safe place for 24 hours to dry naturally.
Maintenance
After every 5-6 times or 3-5 days, please clean the product as follows:
1. Turn off the power, unplug the power cord and open the top cover.
2. Pour out the remaining water in the water tank from the side opposite to the air outlet.
3. Dilute a small amount of neutral detergent into warm water, and then wipe the product with a rag.
4. If you find dirt on the inside of the air outlet, please remove the container cap and clean it up.
5. When maintaining, be sure to use a neutral detergent, otherwise it may damage the product or erase the various marks on the product.
Note: Please be sure to use a neutral detergent.
Applicable Environment
Hotel Rooms, KTV, Conference Room, Office, Gym, Model Room, Family, Elevator, Car, Washroom, Exhibition Hall (cabinet), High-speed Service Area, Shopping Center, Physical Shop, Supermarket, Grocery Store, Flower Store, Pharmacy,Shoes Shop, Cafe...
Packaging & Shipping
Packaging Details
Yellow kraft paper box printed in black type
Port
Xiamen
Lead Time:
Quantity(Bags) | 1 - 500 | 501 - 3000 | >3000 |
Est. Time(days) | 35 | 35 | To be negotiated |
Address:
Shiting Industrial Park, Shiting Town, Xiamen, Fujian, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Zhangzhou Mingniao Electronic Machinery Co., Ltd was founded early in 90s, specialised in the design, manufacture and marketing of motors for roller doors, roller shutters, gates and windows. We propose comprehensive, reliable and innovative solutions for manufacturers and installers of roller shutters, blinds, garage doors and doors and windows for stores, shopping malls, hotels, warehouses, banks, facturies and industrial buildings. By the unremitting efforts of all our employees in past 20 years, we have built up a reputation for reliability, and gained the recognition and respect of our products and services from the market and customers. Innovation, quality and safety have always been considered as our company′s main goals. This commitment at every step of the way is the cornerstone of the Mingniao and its teams.
Mingniao Motor will be your first choice in local and international market. As your committed partner, we will provide our customers with the best quality roller shutter motor with affordable price, the best adapted advice and solution.